Wastewater Treatment Odor Control

In wastewater treatment, odor may arise at inlet works, equalization basins, sludge lines and process points where organic or inorganic loads change.

Application context

In wastewater treatment, odor may arise at inlet works, equalization basins, sludge lines and process points where organic or inorganic loads change.

  • Inlet and screening structures
  • Equalization, aeration and sludge lines
  • H₂S, ammonia and high organic-load variations

Solution approach

Barkan Kimya evaluates source character, air movement and operating conditions instead of covering one odor with another.

  • Assess WHITE MAGIC A2 for predominantly organic wastewater
  • Assess WHITE MAGIC A2S2 for inorganic load, H₂S and ammonia
  • Flow-linked direct dosing or misting at a suitable point

Application data on the existing page

The legacy page gives 16 litres per 1,000 m³ and a 10-15 day period as an example starting point, while explicitly stating that VOCs, organic load, solvents, inorganic pollution, COD and pH change the dose. These are archived field examples, not fixed design criteria.

The page describes WHITE MAGIC A2 for organic wastewater and A2S2 for inorganic load, H₂S and ammonia. Its legacy chart is stated to cover 18 wastewater samples from food, municipal, rubber and dairy sectors.

Wastewater treatment plant
Wastewater odor-neutralization application
Wastewater application study chart

How We Work

  1. Identify the source and dominant emission
  2. Review site and process conditions
  3. Select product and application method
  4. Monitor and adjust the application

Frequently Asked Questions

Does one fixed dose apply to every wastewater stream?

No. Flow, COD, pH, organic/inorganic character, dominant emissions and biological-process conditions must be assessed together.